• Increase font size
  • Default font size
  • Decrease font size
Actuators

parck-lock

?

Parck lock

Application
Parking brake actuator.
Lock/unlock the gear mounted on the wheel shaft

Characteristics

  • Operating temperature range: from -40°C to +120°C
  • Supply voltage range: from 10V to 16V
  • Integrated HALL position sensor with precision default <1°C
  • Max operating angular linear range: 20 mm
  • Maximum push force: 700 N
  • Response time: <350 ms to run 20 mm with 150 N consttant force
  • Communication via CAN signal / interface
  • Electric connector with 4 pins (Ubat, GND, PWM, CAN low, CAN high)
  • SMART
  • Mounted on gear box
  • Resistant and tight to the ATF oil

smartactuator

Smart Actuators 

Description

Actuator operates the movement of the front aerodynamic splitter  assembled in proximity of front crash crossbeam, with two possible positions:

  • CLOSED (0°): Splitter matched with the frontal architecture of the car
  • OPEN (10°): Splitter rotated with a configuration almost parallel to the ground.
Each car is equipped with two actuators, communicating each other by private CAN

smart_actuator

?

Smart Actuator for Turbo

Application
Actuator to control the VNT turbocompressors

Characteristics

  • Operating temperature range: from -40°C to +150°C
  • Supply voltage range: from 10V to 16V
  • Hall position sensor with precision default <1°C
  • Max operating angular range: 110°C
  • Minimum output torque in the worst condition: 20 Ncm
  • Response time: <250 ms to run 90° with 20Ncm torque
  • Communication via PWM os CAN signal / interface
  • Electric connector with 5 pins (Ubat, GND, PWM, CAN low, CAN high)
  • Intelligent electronic design (integrated control algorithm)

江苏快3二不同投注技巧